Onboard Headers And Connectors - ASROCK FM2A88X Extreme6+ User Manual

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA3 Connectors
(SATA3_1_2: see p.10, No. 11)
(SATA3_3_4: see p.10, No. 10)
(SATA3_7_8: see p.10, No. 9)
(SATA3_5: see p.10, No. 12)
USB 2.0 Headers
(9-pin USB_0_1)
(see p.10 No. 21)
(9-pin USB_2_3)
(see p.10 No. 22)
(9-pin USB_4_5)
(see p.10 No. 23)
SATA3_5
USB_PWR
P-1
P+1
GND
DUMMY
1
GND
P+0
P-0
USB_PWR
USB_PWR
P-3
P+3
GND
DUMMY
1
GND
P+2
P-2
USB_PWR
21
These seven Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Besides two default USB 2.0
ports on the I/O panel, there
are three USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.