Advertisement
POWER 1OOHD SPECIFICATIONS
POWER RATINGS:
4 Ohms:
4 Ohms: 30 Watts per channel continuous power, 4 channels
2 Ohms: 25 Watts per channel continuous power, 4 channels
POWER RATINGS: 2 CHANNEL (Bridged)
Frequency Response:
Bandwidth:
Damping Factor:
Signal to Noise Ratio:
Slew Factor:
IM Distortion (IHF):
Input Gain:
15 Watts per channel continuous power, 4 channels
driven into 4 Ohms, from 20 to 20,000 Hertz, with
less than 0.05% THD + N (Total Harmonic Distor-
tion plus Noise).
driven into 4 Ohms at 1000 Hertz, with less than
10% THD + N (Total Harmonic Distortion plus
Noise).
driven into 2 Ohms, from 20 to 20,000 Hertz, with
less than 0.1% THD + N (Total Harmonic Distortion
plus Noise).
50 Watts per channel continuous power driven into
4 Ohms, from 20-20,000
0.10% THD+ N.
(Total Harmonic Distortion plus Noise)
20 to 20K Hertz, ± 5 dB.
15 to l00K Hz ± 3dB
At circuit board:
over 50 (referred to 4 Ohms)
Over 80 dB, unweighted
Over 5
Less than 0.05%
Variable from 40 dBV to 14 dBV
Factory pre-set at 32 dBV
(correct for millivolt-rated source units).
4
Hertz, with less than
Advertisement
