Table of Contents
Advertisement
3
INSTALLATION
3.1
TRANSPORT
Forklift
Crane
Fig. 3.1-1 UPS cabinets moving
3.1.1 Dimensions and weight
W
D
Fig. 3.1.1-1 UPS cabinet dimensions
UPS rating
kVA
SG Series 400 & 500
P.S.: Weights including the 5th harmonic filter.
Modifications reserved
OPM_SGS_ISG_M40_M50_2US_V021.doc
Transport UPS only in upright position!
The UPS is packaged on a pallet suitable for handling with
a forklift.
Pay attention to the center of gravity.
The UPS must be moved in upright position.
Do not tilt cabinets more than +/- 10° during handling.
Move the UPS in it's original package to the final
destination site.
Do not stack other packages on top: This could damage
the UPS.
If the UPS must be lifted by crane, use suitable lifting straps
and spreader bars.
Note of the center of gravity marked on the package.
Take all necessary precautions to avoid damage to the
cabinet while hoisting the UPS.
NOTE !
Check for sufficient floor and elevator
loading capacity.
H
Weight SG Series 400 & 500
Weight
lbs / kg
5,226 / 2,370
Dimensions SG Series 400 & 500
(W x D x H)
80.71 x 33.47 x 76.78 inches
2,050 x 850 x 1,950 mm
Floor loading
lbs/sq.ft - kg/m
279 / 1,359
User Manual SG Series 400 & 500 UL S2
2
Page 10/41
Advertisement
Table of Contents
