Assembly Hints - Nokia 3600 Slide Service Manual

Hide thumbs Also See for 3600 Slide:

Table of Contents

11. ASSEMBLY HINTS

1: UI Flex to Slider Module

1) Place the UI Flex Assy onto the JIG. Note that

the B2B Connector is under the assy and not on

the top.

3) Align the bottom edge of the slider to the

bottom edge of the JIG as shown and press down

firmly.

New Slider Module Assy and new UI Flex needed, the

SS-187 UI Flex Assy JIG must be used.

2) Pull on the top red tab and bottom red tab to

remove the foils. Do not remove the central foil.

4) Make sure the guide pins are aligned correctly.

Confidential

3600 Slide RM-352

Service Manual Level 1&2

ISSUE 1

Table of Contents

Show Quick Links

Table of Contents