Table of Contents
Advertisement
Main Menu
Table of Contents
Turn the ignition switch to the
START (III) position. If the
headlights do not dim, check the
condition of the fuses. If the fuses
are OK, there is probably
something wrong with the
electrical circuit for the ignition
switch or starter motor. You will
need a qualified technician to
determine the problem (see
on page
Emergency Towing
If the headlights dim noticeably or
go out when you try to start the
engine, either the battery is dis-
charged or the connections are
corroded. Check the condition of
the battery connections (see page
221
). You can then try jump
starting the vehicle from a booster
battery (see page
232
).
The Starter Operates Normally
In this case, the starter motor's
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using the proper starting
procedure? Refer to
on page
Engine
241
).
Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
indicator in the instrument panel
to blink rapidly (see page
Do you have fuel? Check the fuel
gauge; the low fuel indicator may
not be working.
There may be an electrical
problem, such as no power to the
fuel pump. Check all the fuses
(see page
Starting the
.
If you find nothing wrong, you will
165
need a qualified mechanic to find the
problem. See
on page
77
).
If the Engine Won't Start
243
).
Emergency Towing
241
.
231
Advertisement
Chapters
Table of Contents
