Honda 2006 Accord Hybrid Reference Owner's Manual page 230

Main Menu Table of Contents
11. Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
12. Lower the vehicle to the ground,
and remove the jack.
WING BOLT
SPACER CONE
13. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf·ft (108 N·m , 11 kgf·m)
Changing a Flat Tire
14. Remove the center cap before
storing the flat tire in the trunk
well.
15. Place the flat tire face down in the
spare tire well.
16. Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
17. Secure the flat tire by screwing
the wing bolt back into its hole.
18. Store the jack and tools in the tool
tray, and place the tool tray back
in the trunk.
CONTINUED
229