Table of Contents
Advertisement
Main Menu
Table of Contents
High Beam Headlight
FASTENERS
1.
Open the hood. To change a bulb
on the driver's side, undo the two
fasteners and remove the air
intake cover.
Remove the electrical connector
2.
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
AIR INTAKE
COVER
3.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
4.
Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
5.
Push the electrical connector onto
the bulb.
BULB
6.
Turn on the headlights to test the
new bulb.
7.
Reinstall the air intake cover.
Reinstall the two fasteners and
secure them by pushing on the
heads until they lock.
TAB
Lights
207
Advertisement
Chapters
Table of Contents
