Dms: Alphanumeric 2-Way Paging Function; Key Functions - Kenwood TK-780 Instruction Manual

DMS: ALPHANUMERIC 2-WAY PAGING FUNCTION

DMS (Digital Message System) is an Alphanumeric 2-way Paging Function, and
is a protocol owned by KENWOOD Corporation. DMS enables a variety of
paging functions on your transceiver, some of which depend on dealer
programming.

KEY FUNCTIONS

Press Selcall
Entry, Selcall
List, Selcall +
Status Entry,
Selcall +
Status List,
or receive a
selcall
Selcall Mode
• Press Selcall Entry, Selcall List, Selcall + Status Entry, Selcall + Status List, or
Queue to change the transceiver mode as shown in the diagram above.
• Press the PTT switch to initiate a call.
• Use the DTMF keypad to enter Selcall or Status numbers.
1
Depending on how your dealer programmed the transceiver, Selcall Mode may be skipped or the
transceiver may exit Selcall Mode automatically (as shown by the dash arrow). When you enter
Selcall Mode after receiving a selcall, the transceiver does not enter Status Mode.
2
Depending on how your dealer programmed the transceiver, the transceiver may exit these modes
automatically, rather than by pressing a key.
Normal Operating Mode
Press Call
or
1
Status Mode
Press Queue
or receive a
new message
Press
any
2
key
Queue Mode
Press
any
2
key
11