Selecting Messages Or Statuses - Icom IP100H Instruction Manual

4
CALLING OPERATION

Selecting messages or statuses

• Message select screen
Message
1000
A message was sent. sent.
May scroll depending on the
message length.
Displays the address (ID) that was
selected before you pushed [FUNC].
• Message, status and the Area Call function selection sequence
Message
1000
Gather immediate
Message
1000
A message was s
Message
1000
Report the result.
• Status select screen
Status
Away from the desk desk
Push
[FUNC]
Push [J]/[K]
Push
[J]/[K]
Push [J]/[K]
Push [FUNC] one or more times.
q
• Select "Message" to transmit messages, or "Status" to
transmit statuses.
• The "Message" or "Status" item may not be selectable,
depending on the IP1000C's settings.
J] or [K] one or more times to select a desired
Push [
w
message or status.
• The selected message or status may scroll, depending
on the message length.
• Selectable message or status may differ, depending on
the IP1000C's settings.
Push [FUNC]
Push
Status
[FUNC]
Meeting
Push [J]/[K]
Status
Push
Away from the de
[J]/[K]
Push [J]/[K]
Status
Under a break
4-4
Area Call
OFF
Push [J]/[K]
Area Call
ON