Konica Minolta bizhub PRO 950 User Manual page 432

13
– When [Bookmark] has been selected on a subsequent screen,
touching the application function key will jump to that screen. See
page 10-5 for details.
– Change the setting as desired, then press [Check] to restore the
Check Screen to return to the checking steps.
– To make a set or sample copy, proceed to step 5.
– To start printing without proof copying, proceed to step 7.
4
Release application functions.
– Touch the desired application function key on the Check Screen to
highlight it, then touch [Clear]. A popup menu will appear to confirm
the change.
Touch [Yes] to cancel the function, or [No] to restore.
– To make a set or sample copy, proceed to the next step.
– To start printing without proof copying, proceed to step 7.
5
Make a sample copy.
– Position originals in the ADF. Or, use Separate Scan mode to scan
all originals.
Press [Proof Copy] on the control panel or touch [Proof Copy] on
the Check Screen. A sample copy will be output.
– Press [Stop] to suspend the proof copying. In this case, the
scanned image data will not be deleted from memory.
– If any setting change is required, return to step 3, then repeat proof
copying as required. However, you cannot change or release selec-
tions that appeared dimmed after proof copying.
– If the copy result is satisfactory, touch [Close] on the Check Screen
to return to the Copy Screen, then proceed to the next step.
6
Change the print quantity, as required.
13-6
Advanced Information
bizhub PRO 950