Application Functions
5
Touch [OK] to complete the setting.
–
To restore the previous setting, touch [Cancel].
–
To release the Stamp/Overlay function with the current setting re-
mained, touch [Function Off].
6
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with the [Stamp/Overlay] key dis-
played under the [Application] key.
This key can also be used to display the Application Screen for making
setting change.
Auto Zoom and Auto Paper are released and ×1.0 magnification is se-
lected automatically.
The [Separate Scan] key on the Copy Screen also appears highlighted
to show that the Separate Scan mode is automatically selected.
7
Select any other copy conditions, as desired.
8
Press [Start] on the control panel.
The original image will be scanned into memory.
9
Touch [Scan Complete] on the popup menu.
10
Position the original to be overlaid.
–
Position the original either in the ADF or on the original glass.
11
Press [Start] to scan.
–
Repeat steps 10 and 11 for all originals.
12
Touch [Scan Complete] on the popup menu.
13
Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
bizhub PRO 950
10
10-93