Cutter Deck; Approximate Dimensions - Scag Power Equipment STT-31BSG Operator's Manual

Section 3

CUTTER DECK

Type:
Construction:
True Cutting Width:
Cutting Height Adjustment:
Cutter Blades:
Cutter Deck Drive:
Blade Engagement:
Discharge Opening:
Caster Wheels:
Spindles:
Spindle Pulleys:
Anti-scalp Rollers:
ADDITIONAL SPECIFICATIONS
Seat:

APPROXIMATE DIMENSIONS

Length:
Tracking Width:
Width:
Width (with discharge chute up) 73.0"
Height:
Turning Radius:
Weight:
PRODUCTIVITY
The following chart will aid you in determining how many acres your Scag mower will cut per day.
The chart is an estimate based on 8 hours per day cutting time at 4 MPH with an allowance for overlap and turns.
Cutting Width:
Acres Per Day:
Date of issue: November, 2000
Specifications Subject to Change Without Notice.
SPECIFICATIONS (con't)
SCAG "SABRE TOOTH TIGER" ZERO-TURN RIDER
MODEL: STT-31BSG
SMST-72A ("Advantage") & SMST-61A ("Advantage"): Floating, adjustable anti-scalping, hybrid
design combines out-front and belly-mount designs. "Advantage" - special extended front edge
allows Bahia or other tough grasses to enter the deck standing upright.
10 gauge steel top reinforced with 7 gauge support plate, deck skirt is 7 gauge steel.
72" deck = 71.5 inches (181.6 cm); 61" deck = 61.0" (155.0 cm).
Foot operated pedal adjustment from operator's seat, 1" to 6" in 1/2" increments.
72" = three (3) 24" blades; 61" = three (3) 21" blades.
Drive shaft to 90 degee gear box.
Electric blade engagement clutch with control panel knob.
Extra wide 11.5" discharge opening with spring loaded discharge chute.
13 x 5 x 6 caster wheels with tapered roller bearing pivots.
Heavy duty 1-1/8" top dimension spindle shaft, cast housing, taper roller bearing, low maintenance
with top access grease fitting and grease overfill relief poppet.
Cast iron with easily removed taper hubs.
Two front, two rear 4-1/2" adjustable, two rear 12" fixed.
Thick padded seat cushions with special springs. Padded arm rests, lever adjustment forward and
back.
72" 61"
92.0" 88.0"
56.0" 56.0"
83.5" 72.0"
61.5"
47.0" 47.0"
Zero radius turn Zero radius turn
1550 lbs. 1550 lbs.
36" 48" 52"
9.5 12.5 13.5
61" 72"
16 19
9