Kenwood XD-980MD Instruction Manual page 71

5
Enter the ON time.
1
The time is
returned.
2
6
Enter the OFF time.
1
The time is
returned.
2
7
Make the desired reservation.
For timer playback or AI timer playback
1 Select the mode.
(1)Select "PLAY" or "AI".
MULTI CONTROL
/VOLUME
1 PLAY ...... Timer play
2 REC
«
3 AI ............Timer play with gradually in-
ENTER
(2)Enter it.
2 Select the input source.
(1)Select the source to be played.
MULTI CONTROL
/VOLUME
1 TUNER ...... Broadcasts
2 CD ............. CD
«
3 MD ............ MD
4 AUX........... External input (tape etc.)
ENTER
(2)Enter it.
3 Select the broadcast station (only when TUNER is selected above).
MULTI CONTROL
(1)Select the preset station No.
/VOLUME
«
(2)Enter it.
The station to be received with timer must be preset before-
ENTER
hand.
8
Select the timer program No. to be used.
MULTI CONTROL
/VOLUME
The time is
advanced.
ENTER
MULTI CONTROL
/VOLUME
The time is
advanced.
ENTER
creasing volume
P L A Y
T U N E R
PROG. 1
1 5 F M 8 9 ) )
SRS 3D
Adjust the clock before setting the timer.
After entering the figure of "hour" with the procedure in 1 and 2,
enter the figure of "minute" using the same procedure.
O N A M 7 ) )
If you make a mistake, restart from step 4.
After entering the figure of "hour" with the procedure in 1 and 2,
enter the figure of "minute" using the same procedure.
O F F A M 8 ) )
If you make a mistake, restart from step 4.
Timer recording of radio broadcasts
1 Select the mode.
«
ENTER
PROG. 1
2 Select the input source.
«
ENTER
PROG.
1
3 Select the recording equipment.
.
«
MHz
ENTER
Each press of the key switches the program numbers as follows.
1 PROG.1........ Execution of program 1 only.
2 PROG.2........ Execution of program 2 only.
3 PROG.1, 2... Execution of programs 1 and 2.
4 Timer OFF
The selected program No. lights.
The timer will not function unless a program No. is selected.
Timer operation
XD-980MD (En)
PROG.
1
:
PROG.
1
:
(1)Select "REC".
MULTI CONTROL
/VOLUME
1 PLAY
2 REC
3 AI
(2)Enter it.
(1)Select the preset station No.
MULTI CONTROL
/VOLUME
(2)Enter it.
(1)Select.
MULTI CONTROL
/VOLUME
1 MD
2 AUX (optional cassette
deck only)
(2)Enter it.
7 1