Kenwood DDX8027 Installation Manual page 4

Connection
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
Disc Changer etc.(Optional)
Connect to the vehicle's parking brake detection switch harness
using the supplied relay connector.
For the sake of safety, be sure to connect the parking sensor.
To Steering remote
Connector A
8 6
7 5
8 6
7 5
Connector B
4
|
English
Connection cable (Included in the disc changer)
PRK SW Parking sensor wire (Green)
Steering remote control input (Light Blue/Yellow)
REMO.CONT
Battery wire (Yellow)
Dimmer control wire (Orange/White)
Ignition wire (Red)
4 2
3 1
4 2
3 1
TV tuner (Optional)
Accessory 4
Antenna Cord
To Vehicle's reverse lamp harness
(Black)
FM/AM antenna input
Reveres sensor wire (Pink)
(Yellow)
ILLUMI
(Red)