Kenwood HD-7 Instruction Manual page 39

8. Put the unit in standby mode.
When the timer setting has been completed,
confirm that the power is off (standby).
Setting the PROG. timer again to the
same contents
Press the TIMER key on the remote control and
light " ", " ", or "
1 2
Remote control unit only
When timer operation is not desired
While the power is on, press the TIMER key on
the remote control to extinguish " ".
Remote control unit only
When the power fails or the plug of the power cable is disconnected from the receptacle during power off
(standby) after timer setting, the standby/timer indicator will flash green. In this case, repeat the time setting.
".
1 2
TIMER
TIMER
÷ The standby/timer indicator lights green.
÷ The SLEEP timer cannot be used when the
timer function is being used for playback.
÷ When the time has not been set, the timer
function cannot be used.
÷ The timer function will not operate when the
same time is set for the ON time and the OFF
time.
÷ The PROG. contents set last will be executed.
÷ Make the preparations for CD.
÷ The PROG. contents will be kept as long as
no resetting is done.
39
Timer operation
HD-7/EN