Basic Use Method - Kenwood HD-7 Instruction Manual

Basic use method

16
1
4
7
DISPLAY
AUX
/TAPE
4
P.CALL
1
TUNING
DOWN
SLEEP
SOUND
Decrease
Listening through headphone
1
POWER
2 3
5 6
8 9
SET
0 +10
ENTER
TIME CLEAR
2
TUNER/BAND
CD
6
¢ 7
STOP
¡
AUTO/MONO
UP
sound
REPEAT RANDOM P.MODE MUTE
TIMER SOUND MUTE
3
DOWN VOLUME UP
1 Power ON (OFF)
When the power is ON and the
comes OFF (standby).
It takes a little time from power OFF operation until the power is
switched off.
÷ For about five seconds after power ON, mute (no sound) status is
applied for circuit protection.
One-touch operation function
When one of the following keys is operated in power OFF (standby) con-
dition, the power will be switched on, the source will be selected, and
playback will start in case of CD.
CD6 key, TUNER/BAND key, AUX/TAPE key.
2. Select the source to be listened to.
CD
TUNER
AUX/TAPE
* The source can also be selected by pressing TUNER/BAND, CD 6, or
AUX/TAPE on the remote control. (Playback will start automatically
when CD 6 is pressed.)
3. Adjust the volume.
Increase
÷ Rapid turning produces a
÷ A guide value (0 to MAX) is shown on the display.
1 1
2 2
phones
)
™
¢
large change in volume. (AI
VOLUME function)
÷ Insert the headphone plug into the headphone jack.
÷ The sound from all speakers are cut off.
÷ Turn the volume/multi control knob to adjust the volume.
÷ Lower the volume before you connect or disconnect plugs.
÷ Headphone with a stereo mini plug can be connected.
II
source
direct
key is pressed, the power be-
L
R
HD-7/EN
3 3
L
R
30 10 5 3 1 0 (–dB)
DIGITAL
30 10 5 3 1 0 (–dB)
DIGITAL