Kenwood VR-5900 Sovereign User Manual page 56

How Do I Operate Devices?
To read the loaded track titles and store them in PowerTouch:
1. Make sure you have followed the previous instructions to read disc
data.
2. Touch (HOME1) on Quick Access menu.
3. Touch
4. Touch . This accesses the disc mode commands.
5. If you haven't already done so on the CD changer, touch
This reads all of the disc and track title information into the CD
changer's memory. Touch
6. Select the disc you want to play and touch
controls.
7. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver's IR transmitter window. Touch
PowerTouch while it is reading data.
This process may take some time, depending on how many CDs you
have loaded. You will see the track titles on the PowerTouch when it
is finished reading data.
8. Touch to return to the CD controls.
Entering Disc and Track Titles
You can also use PowerTouch to enter disc or track titles, if they are not
already stored on the changer. The titles you add are stored in memory
on both PowerTouch and the changer.
To enter disc or track titles:
1. Touch (HOME1) on the Quick Access menu.
2. Touch
3. Stop playing a CD. (if it is playing)
48
.
to return to the CD controls.
.
.
to open the track
. Do not move