Kenwood VR-5900 Sovereign User Manual page 51

How Do I Operate Devices?
5. If you haven't already done so on the CD changer, touch
This reads all of the disc and track title information into the CD
changer's memory. Touch
6. Select the disc you want to play and touch
controls.
7. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver's IR transmitter window. Touch
PowerTouch while it is reading data.
This process may take some time, depending on how many CDs you
have loaded. You will see the track titles on the PowerTouch when it
is finished reading data.
8. Touch to return to the CD controls.
Entering Disc and Track Titles
You can also use PowerTouch to enter disc or track titles, if they are not
already stored on the changer. The titles you add are stored in memory
on both PowerTouch and the changer.
To enter disc or track titles:
1. Touch (HOME1) on the Quick Access menu.
2. Touch
3. Stop playing a CD. (if it is playing)
4. Touch
mands.
If you pressed
rently selected disc.
to return to the CD controls.
.
or . This accesses the appropriate control com-
, you will be entering track titles for the cur-
.
to open the track
. Do not move
43