Adjusting The Brightness Of Receiver; Selecting The Display Mode Of Receiver Front Panel - Kenwood KRF-X7775D User Manual

How Do I Adjust the LCD Display?

Adjusting the brightness of receiver

When the ambient light is low, for example in the night, the brightness of
the receiver's display can be dimmed and LED indicators (THX, DTS,
D.R.I.V.E., DOLBY DIGITAL, MPEG, HDCD and 2-way communication
indicator) can be disabled.
Press the F.SHIFT = SOUND (DIMMER)* buttons. Each press of the
•
SOUND (DIMMER) button switches the brightness as shown below.
1 Display/bright
2 Display/dim
3 Display/dim

Selecting the display mode of receiver front panel

• Press and hold the LISTEN MODE (DISPLAY) button on the receiver
for more than 2 seconds.
The displayed information is switched every 2 seconds of holding the
button.
A: Connected Device
DVD
B: Input Terminal
VIDEO3 :
C: Listen Mode
"Input Mode" is displayed only when a selector with digital input is se-
lected.
When the selected input is PHONO, TUNER or AV AUX, the connected
device and listen mode are displayed alternately. (Switching between A
and C). "Input mode" and "Connected Device" do not be displayed.
The TUNER display shows the frequency.
* When an operation is described as [F.SHIFT = SOUND (DIMMER)
button], for example, press the F.SHIFT button and press the next button
(the SOUND (DIMMER) button in this case) within 8 seconds.
Indicators/enabled
Indicators/enabled
Indicators/disabled
Input Mode
AUTO
Connected Device
DVD
DOLBY DIGITAL
53