Selecting The Inputs - Kenwood KRF-X7775D User Manual

How Do I Adjust the Surround Modes?

Selecting the Inputs

To select an input on the receiver:
Press one of the INPUT SELECTOR (¤/‹) buttons. Each press changes
the input in the following order.
1 Tuner (frequency display)
2 CD1
3 MD/TAPE1
4 CD-R
5 VIDEO1
6 VIDEO2
7 VIDEO3
8 DVD
9 AV AUX
0 PHONO
Although VIDEO4 is displayed in the initial status, the receiver cannot be
switched to select VIDEO4. The VIDEO4 display will not appear after
Remote Control unit has been set up.
To select an input on Remote Control unit:
The TV-monitored device, video device and audio device can be selected
using separate buttons.
Audio device
MUSIC
1 CD1
2 MD/TAPE1
3 Tuner
4 CD-R
5 PHONO
If any of the above
inputs is not
identified, the next
device name will be
displayed.
Video device
MOVIE
1 VIDEO1
2 VIDEO2
3 VIDEO3
( 4 VIDEO4)
5 DVD
6 AV AUX
If any of the above
inputs is not
identified, the next
device name will be
displayed.
¤ INPUT SELECTOR ‹
To return to the previously dis-
played input, press the other
button.
TV button
TV
1 TV1
2 TV2
3 CABLE
The TV button
cannot select the
input.
It can be used to
remote control TV1,
TV2 or CABLE if ,
devices are
identified at these
inputs.
35