After Use; Insufficient Water - Miele DG 2351 Operating And Installation Instructions

Operation

After use

^ Switch the appliance off.
^ Remove the condensate tray and
empty it out.
^ Remove the water container and
empty it out.
^ After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
^ Leave the door open until the
cooking compartment is completely
dry.
The appliance is designed in such a
way that there will always be a little
residual water left in the water
container after use. If there is no
residual water in the container there
is something wrong. Call the Service
Department.
30

Insufficient water

Insufficient water is indicated in the
time/temperature display by the
flashing p symbol. An audible tone will
also sound during operation.
Proceed as follows:
^ Check the water level and add water
if necessary.
^ Push the water container into the
appliance until it connects.
^ Close the door.
You can now use the oven as normal.