Table of Contents
Advertisement
page with 21 swatches will print to
the printer.
11. Place the printed page on a stack of
5 sheets of blank paper to prevent
bleed through.
12. Align the plastic guide strip up so
that the center passes through the
first column of swatches (Cyan).
13.
Click Measure.
14. Confirm that you
patches and click Measure.
15.
A window opens that request
"Please place the ES-1000 in i
calibration cradle and click Ok."
Click Ok.
are doing 21
ts
16. Measure the cyan swatches by
starting the ES-1000 in the grey
bracket atop the swatches.
17. Click the button on the device and
wait for an audible beep. If you
cannot hear the beep then wait 1-2
seconds, before dragging the
device down the page.
18. While holding the button drag the
device smoothly down the plastic
guide until you have passed the
last swatch, then release the
button. To judge the correct
speed, from start to finish, use a
count of 4.
19. When the scan has been
successful, a check will appear and
the red cross will move to the next
color.
20. When all four colors have been
scanned, click the Accept button.
21. Click Ok.
22. Click Apply.
8
Advertisement
Table of Contents
