Optoma HD710 Service Manual page 64

12. Programming
- Key in the serial number into the
barcode blank space.
- In "Write Source Select", make a check in
"Digital".
- Click "Program".
13. Change the cable to Digital
- Message box appears on the screen, then
click "OK".
14. When the EDID program is completed,
a message "OK" will appear on the screen.
15. Read EDID "Digital" information
- In the Read item,select "Digital"and "Trans",
then click the "Read" button.
16. EDID Informations will show the result
HD71/HD710/HD75 Confidential
6-6