Optoma HD710 Service Manual page 63

7. Read EDID "Analog" information
- In the Read item,select "Analog"and "Trans",
then click the "Read" button.
8. EDID informations will show the result.
9. Read EDID "Digital" information
- If EDID's information is correct,select
"Digital" and"Trans" in the Read item,then click
the "Read" button.
10. EDID informations will show the result.
11. Unplug DVI cable from Project then use DVI-
HDMI adapter to connector DVI cable and
Project.
Plug into Project HDMI Port
HD71/HD710/HD75 Confidential
6-5