Connection Of Speakers (Kr-797) - Kenwood KR-797 Instruction Manual

Connection of speakers (KR-797)

8
Powerd
sub-woofer
VIDEO 2
PLAY IN
REC OUT
TAPE 2
ANTENNA
MONITOR
AM
PLAY IN
FM
300Ω
REC OUT
VIDEO 1
PHONO /TAPE 1
GND
PLAY
L
R
FM
75Ω
R L
AUDIO
÷ Never short-circuit the + and - speaker cords. For the symptom and remedy when a speaker cord is shorted:
÷ If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes unnatural with
ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
÷ Connect a sub woofer if you want to enhance the bass sound. The connected sub-woofer should be a power sub-woofer with a built-in amp.
ADAPTOR jacks (KR-797)
When an adaptor-type component such as a graphic equalizer is
connected, unplug the shorting pins from the ADAPTOR jacks and
connect the component to these jacks.
÷ When the ADAPTOR jacks are not used, be sure to plug the shorting
pins into jacks. Otherwise, the sound will not be produced.
÷ When the ADAPTOR jacks are used, retain the shorting pins and be
careful not to lose them.
÷ Never plug a shorting pin into other jacks than ADAPTOR jacks.
Otherwise, the unit may be damaged.
Center speaker
(8Ω ~ 16Ω)
ª ·
L
L
R
R
OUT IN
ADAPTOR
R L
SYSTEM
CONTROL
IN
CD
SURROUND
ƒ
( )
SPEAKERS
SUBWOOFER
( 4−8Ω)
PRE OUT
ª · ·
R
Surround speakers
(4Ω ~ 8Ω)
Speaker system
(8Ω ~ 16Ω)
R
L
· ª ª ·
FRONT SPEAKERS
C
( 8−16Ω)
+ +
− −
CENTER
L
R
SPEAKER
( 8−16Ω)
ª
L
L
R
OUT
ADAPTOR
SWITCHED
1 Push lever.
2 Insert cord.
3 Return lever.
Shorting pins
shorting pins
L
R
IN
KR-897/KR-797 (En)
•