Digital Connections - Kenwood 5.1 KRF-V7050D Instruction Manual

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section
carefully.
75µs
AM 10kHz
FM 100kHz
50µs
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
DVD
VIDEO 2
COAXIAL
COAXIAL
DIGITAL
OUT
(AUDIO)
demodulator
(DEM-9991D)
(sold separately)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
PLAY IN REC OUT PLAY IN PLAY IN PLAY IN
L
MONITOR
OUT DVD VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 3
R
A
R L C
CD/DVD VIDEO 3
OPTICAL OPTICAL
DIGITAL IN
Optical fiber
cable
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See "Connecting video components".)
COAXIAL DIGITAL OUT
(AUDIO)
RF digital
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD player
B
R L
R L
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber cable
CD or DVD player
OPTICAL DIGITAL OUT
(AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
!
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
!
Setting up the system
9
13