Digital Connections - Kenwood VR-50RS Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to this model, be sure to read the "Input mode settings" section carefully.
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of this model.
Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See "Connecting video components".)
COAXIAL OPTICAL
VIDEO 2 CD / DVD
DVD
DIGITAL IN
Optical fiber cable
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital
demodulator
(Commercially
available)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
OPTICAL DIGITAL OUT (AUDIO)
CD or DVD player
COAXIAL DIGITAL OUT
(AUDIO)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
LD player
!
8
13 EN