Scientific Atlanta DPR2320TM User Manual page 45

Gateway cable modems
Table of Contents

Advertisement

WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User's Guide
44
Setup Basic Settings – Fixed CPE IP Assignment Page
Description
The following tables provide a description of the fields within the Setup Basic
Settings – Fixed CPE IP Assignment page.
Field Name
MAC Address
Assign to IP
Function Keys
Key
Add Static IP
Remove Static IP
Restarting the Gateway Modem
Use the Setup Basic Settings – Restart Cable Modem page to restart your cable
modem.
Click Restart Modem in the Basic Settings section of the Setup page to access
the Basic Settings – Restart Cable Modem page.
Click Reboot Cable Modem to restart the gateway modem.
Restarting your gateway modem does not reset any of the settings.
Setup Basic Settings - Restart Cable Modem Page Example
The following illustration is an example of the Restart Cable Modem page.
Description
The MAC address of the PC or device (for example, a
printer) for which you want to reserve a specific IP
address on the network
The IP address you assign to the PC or device for which
you want to reserve a specific IP address on the
network (for example, 192.168.0.7). The factory
configuration of your gateway sets aside IP addresses
192.168.0.2 through 192.168.0.9 for static IP addresses
Description
Adds the Static IP address to the list of assigned IP
addresses
Removes the Static IP address from the list of assigned
IP addresses

Advertisement

Table of Contents
loading

This manual is also suitable for:

Epr2320tmWebstar dpr2320Webstar epr2320

Table of Contents