TP-Link Archer D5 User Manual page 78

Archer D5 AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Guest Network: When enable this function, you can set wireless parameters for guest

network.
 SSID: The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network. The
default name is TP-LINK Guest_5GHz.
 Security: It's strongly recommended to enable WPA/WPA2-Personal. WPA/WPA2-Personal
is the WPA/WPA2 authentication type based on pre-shared passphrase.
 Authentication Type: Select the Authentication Type from the drop-down list, the default
method is Auto, and you can leave it as a default setting.
 Encryption: You can select Auto, TKIP or AES.
 Wireless Password: You can enter the ASCII characters between 8 and 63 characters or 8
to 64 Hexadecimal characters.
 Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 Allow Guests to access my Local Network: The guests have access to your Local
Network, but can not login the modem router's web management page.
 Allow Guests to access my USB Storage Sharing: The guests can access the specified
files on the USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to
 Guest Network Isolation: This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
 Guest Network Bandwidth Control: With this function, you can configure the Upstream
/Downstream Bandwidth for guest network.
Click Save to save your settings.
Figure 4-52
4.11.3 Storage Sharing.
67