Table of Contents
Advertisement
VIVOTEK
Image settings
On this page, you can tune the White balance and Image adjustment settings.
Sensor Setting 1:
For normal situations
White balance: Adjust the value for the best color temperature.
■ Select one of the white balance modes:
■ Auto (system default): This mode lets firmware automatically find the optimal balance.
■ Fix current value: This option is available when the Wide lighting range is selected. When selected, the
camera will use the current color temperature setting. Note that you should use the Save button below
to preserve current configuration. Otherwise, the white balance mode will return to Auto after you leave
the configuration page.
■ Manual: In the manual mode, you can manually tune the R gain and Blue gain values by dragging the
slide bars. Index numbers will be shown on the right hand side while changes in image is immediately
displayed.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5.
■ Saturation: Adjust the image saturation level, which ranges from 0% to 100%.
■ Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.
■ Gamma curve: Adjust the image sharpness level, which ranges from 0% to 100%.
You may let firmware Optimize your display or select the Manual mode, and pull the slide bar pointer to
change the preferred level of Gamma correction towards higher contrast or towards the higher luminance
for detailed expression for both dark and lighted areas of an image.
54 - User's Manual
Advertisement
Table of Contents
