Table of Contents
Advertisement
VIVOTEK
Installation
Hardware Installation
The camera weighs 2.4kg. Select a rigid mounting location to prevent vibration to the camera.
1. Remove the retention screw on the side of camera.
2. Turn and detach the top section.
3. Attach the alignment sticker to the wall. Drill 3 pilot holes into the wall, and drill another hole
for routing cables.
NOTE:
1. IO wires are user-supplied.
2. Avoid touching the circuit boards to prevent damage by electro static discharge.
3. Use CAT5e and CAT6 cables only.
10 - User's Manual
2
3
1
Advertisement
Table of Contents
