Installation; Getting Started; Remove Existing Installations - D-Link Xreme N DWA-160 User Manual

Section 2 - Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager before installing
your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software is uninstalled.
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters
• Disable any built-in wireless adapters
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to
If you've installed a different manufacture's adapter or a different model D-Link adapter, make sure the software is uninstalled before installing
the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different times, make sure the
utilities are not set to load when your computer boots up. Windows
To remove any old software:
Windows® 8 users: Press Windows Key + Q > Control Panel > Uninstall Programs.
Windows® 7 users: Click Click Start > Control Panel > Uninstall Programs.
Windows Vista®/XP users: Click Start > Control Panel > Add or Remove Programs.
D-Link DWA-160 User Manual

Installation

Getting Started

Remove Existing Installations

7, Vista
®
and XP users may use the built-in wireless utility for all adapters.
®
7