D-Link Xreme N DWA-160 User Manual page 14

Section 2 - Installation
Push Button Configuration (PBC)
To connect to your network using the WPS push button configuration method,
click the virtual button as shown in the screenshot.
Note: You may also connect to your network by pressing the WPS button on the
adapter and holding for two seconds until the wizard screen comes up. Then,
press the WPS button on the router/access point to continue.
Press the WPS button on your access point or wireless router within 2 minutes
to establish connectivity.
When this screen appears, you have successfully connected to your wireless
network. Click Next to complete your setup.
D-Link DWA-160 User Manual 14