Adjusting Volume; Date And Time - Panasonic KX-MB781C Operating Instructions Manual

Multi-function printer
Hide thumbs Also See for KX-MB781C:
Table of Contents

Advertisement

Volume

2.6 Adjusting volume

Before adjusting volume, set the operation mode to fax
mode (page 16).
Ringer volume
While the unit is idle, press {V} or {^}.
L If there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {V} repeatedly to display "RINGER OFF= OK?".
i {SET}
L The unit will not ring.
L To turn the ringer back ON, press {^}.
Ringer pattern
L You can select one of 3 ringer patterns (feature #161
on page 50).
Monitor volume
While using the monitor, press {V} or {^}.
{SET}
{V}{^}
Initial Programming

2.7 Date and time

{FAX}
1
{MENU} i {#}{1}{0}{1} i {SET}
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{7} {1}{0} {1}{5}.
2. Press {*} repeatedly to select "PM".
3
{SET}
4
Press {MENU} to exit.
Note:
L The other party's fax machine will print the date and
time on the top of each page you send according to
your unit's date and time setting.
L If you have selected French as the language (feature
#110 on page 49), the time is set using a 24 hour
clock.
Example: 15:15
Press {1}{5} {1}{5}.
L After setting the date and time, if the unit is in the
copy mode, change it to the fax mode by pressing
{FAX}. You can check your unit's date and time
setting on the display.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Call Display service
The date and time will be automatically set according to
the received caller information.
L If the time has not previously been set, Call Display
will not adjust the clock.
L You can turn this feature OFF (feature #226 on page
50).
2. Preparation
{MENU}
{SET}
{<}{>}
M:|
0 1/D:01/Y:07
TIME: 12:00AM
M:|
0 8/D:10/Y:07
TIME: 10:15AM
19

Advertisement

Table of Contents
loading

Table of Contents