Specifications - Kenwood SW-305 Instruction Manual

Specifications

12
Type .................................................... Subwoofer system with built-in amplifier
[Amplifier]
Rated Output Power ........................ 100 W RMS 30 Hz ~ 200 Hz, 4
Phase Switching ............................... NORMAL, REVERSE
Input Sensitivity & Input Impedance
RCA-type pin-plug jack ................. 100 mV /12 k
Push-type terminals ...................... 1.7 V /15 k
[Speaker]
Enclosure ........................................... Bass-Reflex, Floor Standing Type
Speaker Unit ..................................... 200 mm (8") Cone type
Nominal Impedance ......................... 4
[General]
Rated Power Consumption ............ 90 W
Dimensions ........................................ Width
Net Weight ........................................ 12.2 kg (26.9 lb)
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be
Notes Notes
Notes
changed without notice.
¶
Sufficient performance may not be exhibited at extremely cold locations (where water freezes).
(Magnetically shielded)
200 mV /12 k (MONO Input)
: 250 mm (9-13/16")
Height : 422 mm (16-5/8")
Depth : 408 mm (16-1/16")
SW-305 [EN]