Pioneer BDP-LX88 Operating Instructions Manual page 43

Setting Options
HDMI Mode
Dual
Separate
Pure Audio
Single
Also refer to Setting the HDMI Mode on page 17.
Color Space RGB
YCbCr
YCbCr 422
Full RGB
HDMI Audio Out
Bitstream
PCM
Reencode
Control
On
Off
To use Sound Retriever Link and PQLS function (pages 17), Control must be set to On.
HDMI Deep Color 30bits
36bits
Off
When [30bits] or [36bits] is selected, set the color space (page 43) to a setting other than YCbCr 422.
HDMI 3D
Auto
Off
3D Notice
Yes
No
IP Address Setting Select this to set the IP address of the player and DNS server (page 46).
Proxy Server Only set the proxy server if so instructed by your Internet service provider (page 46).
Information Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Connection Test Select this to test the network connection (page 46).
BD-Live Connection
Permitted
Partial Permitted
Prohibited
DLNA
Enable
Disable
Explanation
Video and audio are output simultaneously from the two HDMI OUT
terminals. Select this when you want to output video and audio to two TV sets
simultaneously.
Select this when you want to output the video and audio separately, the video
from the HDMI OUT (MAIN) terminal, the audio from the HDMI OUT (SUB)
terminal.
Select this to enjoy music only with a better sound quality when devices are
connected to both HDMI output terminals. With this setting, music is output
from the HDMI OUT (SUB) terminal only, and video signals are only output
from the HDMI OUT (MAIN) terminal when DISPLAY is pressed.
This is selected when connecting a device for use with the HDMI OUT
(MAIN) terminal only.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
Select this to output the video signals as RGB signals. Choose this if the colors
seem too dense and all the dark colors are displayed in a uniform black.
Select this to output HDMI audio signals directly.
Select this to output HDMI audio signals converted to PCM audio signals.
When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 17.
Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
Select this when outputting the video signals with 30-bit color.
Select this when outputting the video signals with 36-bit color.
Select this when outputting the video signals with normal 24-bit color.
With 3D discs, the disc is played with 3D images.
3D images are not played.
This sets whether or not to display the 3D notice when playing 3D images.
All discs are allowed to connect to BD-LIVE.
Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
No disc is allowed to connect to BD-LIVE.
Select this when connecting to DLNA server.
Select this when not connecting to DLNA server.
08
43
En