● Code :
M3-2130
● Symptom / Cause :
Too much paper in output bin tray or the bin full sensor actuator or sensor is defective.
Status LED – Red is on.
Printer does not print
● Troubleshooting method :
1. Remove paper from the output tray.
The machine resumes printing.
Machine can hold up to 50 sheets (80 g/m2) of plain paper.
In order to prevent Out-bin full error again, use output tray guide such as following picture.
● Replacement part
Service Manual
Alignment and Troubleshooting
● Error message :
Out-Bin Full.
4-33
Samsung Electronics