● Code :
C1-1411
● Symptom / Cause :
The data of CRUM is not detected.
1. Toner cartridge is not placed in the set.
2. Physical obstacle is jamming the electronic signal through the modular jack.
3. The signal from set is not proper.
● Troubleshooting method :
1. Open the scan unit.
3. Insert the toner cartridge into the machine.
● Replacement part
Service Manual
Alignment and Troubleshooting
● Error message :
Toner cartridge is not installed. Install the cartridge.
4-28
2. Open the inner cover.
Samsung Electronics