● If you select [Rotate]:
❑
Press [Next] ➞ select [LTR] or [LTRR].
IMPORTANT
•
[Rotate] can be selected only in the following cases:
- If the available paper size is selected manually
- If the available paper size is loaded in both the horizontal and vertical directions
- The selected paper source must have Drawer Eligibility For APS/ADS in Common
Settings (from the Additional Functions screen) set to 'On'. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
•
When you have selected Automatic Paper Selection for the Rotate mode, make
sure to select a paper size which can be rotated. Otherwise, output will not be
rotated.
•
If there is no paper which can be rotated, output will be collated.
3
Press [OK].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
4
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Copying starts.
NOTE
To cancel this setting, press [Finishing] ➞ [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
(Start) once for each original. When scanning
Collating Copies
2
2-35