Getting Your Messages - Uniden DECT 2130 Owner's Manual

getting your messages

To
play new messages
restart this
message
replay an earlier
message
skip a message
delete a message
delete all
messages
play old messages
stop playback
using the system while you're away from home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
programming a security Code
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code. Use
the number keypad to enter a two-digit security code (01 to 99). Press
MENU/SELECT when you're finished (see page 21).
# remember to make a note of your new security code!
20
From a Handset
Press MESSAGE/MUTE and select Play Message.
The system announces the number of new & old
messages, then plays each new message (followed
by the day and time) in the order it was received.
Wait at least 5 seconds after the message starts
playing,
select 1:Repeat.
Within 2 seconds after a message starts playing,
select 1:Repeat.
Select 3:Skip.
While a message is playing, select 4:Delete.
Not available.
After the system plays all new messages,
select 2:Play.
Select 5:Stop.