Handset To Handset Intercom; Chain Dialing; Voice Message Notification - Uniden DECT 2130 Owner's Manual

handset to handset Intercom

• Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
• If an outside call comes in during an intercom page, the phone cancels
the page so you can answer the incoming call.
• If an outside call comes in during an intercom call, press TALK/FLASH
to hang up the intercom call and answer the outside call.
To...
make an intercom page
cancel a page
answer a page
end an intercom call

Chain dialing

If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Enter the code number (up to 32 digits) into the phonebook just like a
regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press MENU/SELECT to send the code. If you change your mind, just
close the phonebook.

Voice message notification

If you subscribe to a voice mail service, your phone displays the voice
mail icon (
Frequency-Shift Keying (FSK) notification.
After you listen to your messages, the message icon turns off. If it doesn't,
you can reset it: With the phone in standby, open the menu and select
Global Setup; select VMWI Reset, then select Yes.
Press...
INTCOM/CLEAR
want to talk with, or All to page all handsets
at the same time
END
INTCOM/CLEAR or TALK/FLASH
END. Both handsets return to standby.
) when you have a new message. This feature supports
Select the handset you
.
17