Table of Contents
Advertisement
9
CONNECTIONS AND MAINTENANCE
Microphone installation (Continued)
w To use the connection cable as a wall socket, perform the
following steps.
e Using the mounting base as a template, carefully mark the
holes where the cable and three screws will be fastened.
r Drill holes at these marks.
t Install the mounting base using the supplied screws as
shown below.
Screw holes
(approx. 2 (d) mm;
64
Mounting base
Nut
Gasket
Screw holes
(approx. 2 (d) mm;
3
⁄
˝)
Cap
32
Mounting base
Nut
Gasket
3
⁄
˝)
Cap
32
y The completed installation should look like this.
Advertisement
Table of Contents
