Table of Contents
Advertisement
D U.S.A., international and Canadian channels
The IC-M504A is pre-programmed with 59 U.S.A., 59 interna-
tional and 63 Canadian channels. These channel groups may
be specified for the operating area.
q Push
w While holding down [H/L], push
change the channel group, if necessary.
quentially selected.
e Rotate [DIAL] to select a channel.
DUP" appears for duplex channels.
selects a channel.
25W
34°34.506N
123°23.236W
UTC 12:00 PORT OPR
Push
25W
INT
DUP
34°34.506N
123°23.236W
UTC 12:00 TELEPHONE
to select a regular channel.
again.
to
[Y]/[Z] on the microphone, also
USA
+
25W
CAN
34°34.506N
123°23.236W
UTC 12:00
CCG
D Weather channels
The IC-M504A has 10 weather channels. These are used for
monitoring broadcasts from NOAA (National Oceanographic
and Atmospheric Administration.)
The transceiver can automatically detect a weather alert tone
on the selected weather channel while receiving on another
channel, during standby on a regular channel or while scan-
ning. (p. 54)
-
q Push
weather channel.
WX" appears when a weather channel is selected.
WX ALERT" appears when the Weather Alert function is in
turned ON. (p. 54)
w Rotate [DIAL] to select a channel.
selects a channel.
Push
once or twice
WX
34°34.506N
123°23.236W
UTC 12:00163.275MHz
When weather alert is OFF.
BASIC OPERATION
once or twice to select a
[Y]/[Z] on the microphone, also
WX ALERT
34°34.506N
123°23.236W
UTC 12:00163.275MHz
When weather alert is ON.
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
7
Advertisement
Table of Contents
