Rinnai RL75i Installation And Operation Manual page 65

Schéma de tuyauterie pour installation de base
Conduite d'eau chaude en 3/4" pour Conduite d'eau chaude en 3/4" pour
alimenter les équipements du bâtiment
Robinet à boisseau 3/4"
3/4" Ball Valve 3/4" Ball Valve
Raccord-union 3/4"
3/4" Union 3/4" Union
Clapet anti-retour
Check Valve Check Valve
Soupape de décharge
Pressure Relief Valve Pressure Relief Valve
3/4" Hot Water Supply Line 3/4" Hot Water Supply Line
For Building Fixtures For Building Fixtures
KEY KEY
LÉGENDES
Pressure Regulator Pressure Regulator
Régulateur de pression
Pompe de circulation
Circulating Pump Circulating Pump
Vanne de drainage
Boiler Drain Valve Boiler Drain Valve
de chauffe-eau
S S
Solenoid Valve Solenoid Valve
Électrovanne
Rinnai Rinnai
Water Heater Water Heater
Chauffe-eau
This is not an engineered drawing. It is intended only as a guide and not This is not an engineered drawing. It is intended only as a guide and not
Ceci n'est pas un dessin technique. Son seul but est de guider, et non de remplacer
as a replacement for professionally engineered project drawings. This as a replacement for professionally engineered project drawings. This
des dessins techniques professionnels de projet. Ce schéma n'a pas vocation à
drawing is not intended to describe a complete system. It is up to the drawing is not intended to describe a complete system. It is up to the
décrire un système complet. Il est de la responsabilité du sous-traitant ou de
contractor/engineer to determine the necessary components and contractor/engineer to determine the necessary components and
l'ingénieur en charge de déterminer les composants nécessaires pour le système
configuration of the particular system being installed. This drawing does configuration of the particular system being installed. This drawing does
spécifique à installer. Le schéma ne sous-entend pas une conformité avec les
not imply compliance with local building code requirements. It is the not imply compliance with local building code requirements. It is the
exigences des normes locales de construction. Il est de la responsabilité du sous-
responsibility of the contractor/engineer to ensure installation is in responsibility of the contractor/engineer to ensure installation is in
traitant ou de l'ingénieur en charge de s'assurer que l'installation est en conformité
accordance with all local building codes. Confer with local building accordance with all local building codes. Confer with local building
avec toutes les normes locales de construction. Consultez les autorités locales de
officials before installation. officials before installation.
construction avant l'installation.
Manuel de Série VC
Rinnai Rinnai
Equipment List Equipment List
Rinnai Rinnai
Water Heaters Water Heaters
RIK-KIT (Optional) RIK-KIT (Optional)
(3/4" Fittings Include: (3/4" Fittings Include:
2 Unions, 2 Ball Valves, 2 Unions, 2 Ball Valves,
2 Drain Valves and 2 Drain Valves and
1 Pressure Relief Valve.) 1 Pressure Relief Valve.)
Connexion de gaz 3/4"
Arrivée du gaz
Conduite d'alimentation en eau froide 3/4"
QTY QTY
1 1
1 1
65