Advertisement
Wolf Fryer Module
Fryer Module Installation
IMPORTANT NOTE: Installation of the Wolf electric fryer
module must be completed by a qualified installer.
Read this entire installation guide prior to installation and
save for the local inspector's reference. The homeowner
should keep this installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency, and amperage ratings are listed on the
product rating plate.
Record the model and serial numbers before installing
the fryer module. Both numbers are listed on the product
rating plate, located on the underside of the module. Refer
to the illustration below.
RATING PLATE
Location of rating plate.
Wolf Fryer Module
Model Number
Serial Number
wolfappliance.com/specs
IF15/S
3
Advertisement
