Advanced Operations; Autodial; Talk Around - Kenwood TK-2202L Instruction Manual

The following functions are programmable by your dealer, as
described on page 13.
A
UTODIAL
Press and hold the PTT switch, then press the key
programmed as Autodial to transmit the stored DTMF code.
Release the Autodial key, then speak into the microphone
while still pressing the PTT switch to call the other party.
T A
ALK ROUND
You may occasionally experience an interruption in service
(due to a power failure, etc.). During such an occurrence, you
can continue communication by using the Talk Around feature,
if it has been programmed by your dealer.
Talk Around allows you to communicate directly with other
transceivers, without the use of a repeater. However, if the
station you want to contact is too far away, or there are
geographical obstacles in the way, you may not be able to
contact the station.
Toggle Talk Around ON and OFF by pressing the key
programmed as Talk Around.
• When using Talk Around, the receive frequency is used for
both transmission and reception, and the decode
signalling is used for both encoding and decoding.

ADVANCED OPERATIONS

15