M Icrophone J Acks; Nstalling The; Over Over The; Peaker / Microphone - Kenwood TK-2202L Instruction Manual

I

NSTALLING THE

Speaker/ microphone
jack cover
I
NSTALLING THE
Speaker/ microphone
locking bracket
C

OVER OVER THE

If you are not using a speaker/
microphone, install the cover over the
speaker/ microphone jacks using the
supplied 3 x 6 mm screw.
Note: To keep the transceiver water
resistant, you must cover the speaker/
microphone jacks with the supplied
cover.
O S
PTIONAL PEAKER
1 Insert the speaker/ microphone
2 Attach the locking bracket using
Note: The transceiver is not fully water
resistant while using the speaker/
microphone.
S / M
PEAKER
/ M
ICROPHONE
(or headset) plugs into the
speaker/ microphone jacks.
the supplied 3 x 6 mm screw.
J
ICROPHONE ACKS
( H
OR EADSET
11
)