Lennox Elite EDV35RNM Care And Operation Instructions Manual page 14

Log
Number Description
1 Log, Rear
2 Log, Diagonal/Left
3 Log, Diagonal/Right
4 Log, Front/Left
5 Log, Top/Right
6 Log, Front/Center
Catalog Number for the entire log set: 55M03
Locating Pins
2
Align The Holes In One End Of Logs 2 & 3 Over The
Locating Pins And Align The Grooves On The Other
End Over The Grate And Push It Toward The Rear
Figure 8
14
EDV40 AND EDV45 LOG PLACEMENT
1
Align Groove At The Bottom
Of Log (1) Over The Grate And
Push It Towards The Rear.
Locating Pin
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
2
4
Align The Hole On The Log (5) Over The Locating Pin
And Postition The Notch Over The Grate As Shown
4
Align The Groove In The Bottom Of Log (4)
Over The Grate And Slide It Toward The Front.
3
6
Position The Grooves On Log (6)
Against The Grate As Shown
1
3
5
6
5