Using The Channel Setup Menu - Sony TRINITRON KV-27FS320 Service Manual

Using the Channel Setup
To access the Channel Setup menu, use the
following steps:
To Display To Highlight
f
Press to highlight an option, then press
Favorite 1 Use the
to set a favorite channel, then press
Channels
Quick access
2 Use the
to favorite
favorite channels.
channels
3 Press
the selected channel and assign it to the selected position (1-5).
4 Press
To use Favorite Channels, exit all menus and press
desired channel number and press
Use the
Cable
to select it.
On:
Off:
After changing your cable settings, you will need to perform Auto Program. See "To perform Auto
Program again" on page 23.
Channel Fix Use the
press
Off:
2-6:
Video 1:
You cannot use Favorite Channels, Cable, Channel Skip/Add, or Channel Label when Channel Fix is set.
Menu
To Select
.
F f
or buttons to highlight the position (1-5) where you want
F f
or buttons to find the channel you want to add to your
to select the channel. The TV will automatically change to
G
to return to the Channel Setup menu or press
.
F f
or buttons to highlight one of the following options, then press
Select if you are receiving cable channels with a CATV cable.
Select if you are using a TV antenna.
F f
or buttons to highlight one of the following options, then
to select it.
Channel Fix is not set.
Select when you want to control all channel selection through
a cable box or VCR. Select the appropriate channel (usually 3
or 4) and use the cable box's or VCR's remote control for
channel selection.
Select from available video inputs when you have connected
video equipment (e.g., a satellite receiver) and you want your
TV fixed to it.
Channel Setup
Favorite Channels
C a b l e : O n
C h a n n e l F i x : O f f
A u t o P r o g r a m
C h a n n e l S k i p / A d d
C h a n n e l L a b e l
Move Select
.
F f
. Press or to move the cursor to the
End
to exit.
31