Sony TRINITRON KV-27FS320 Service Manual page 129

Connecting a TV, VCR, and Cable Box
DIGITAL CABLE BOX USERS: If you are connecting a digital cable box, you will need a special bi-
directional splitter (5-900 Mhz mininum) that is designed to work with your digital cable box.
Use this connection if you subscribe to a cable system that scrambles some channels (pay
channels), but not all of them. This setup allows you to:
change channels through your cable box or VCR when you are receiving a
scrambled signal
change channels through your TV
2b
Splitter
1
Cable
2a
1
Connect the single input jack of the splitter (not supplied) to your incoming cable
connection.
2
Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your cable box
b) the VHF/UHF jack on the TV
3
Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack
on your VCR.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
VCR
LINE
IN
VIDEO AUDIO L AUDIO R
LINE
OUT
3
VIDEO AUDIO L AUDIO R
LINE
OUT
Cable box
Rear of TV
1 3 4
S VIDEO
Y
P
B
AUDIO OUT
(VAR/FIX)
P
R
VIDEO
L L L
(MONO) (MONO)
R R R
Video (yellow)
Audio L (white)
Audio R (red)
4
5
13